Product Detail
Our Company Offer Rainwater Harvesting System.. A rainwater harvesting system comprarees components of various stages - transporting rainwater through pipes or drains filtration and storage in tanks for reuse or recharge.. The common components of a rainwater harvesting system involved in these stages are illustrated here.. 1.. Catchmensts: The catchmenst of a water harvesting system are the surface which directly receives the rainfall and provides water to the system.. It can be a paved area like a terrace or courtyard of a building or an unpaved area like a lawn or open ground.. A roof made of reinforced cemenst concrete RCC galvanareed iron or corrugated sheets can also be used for water harvesting.. Source: A water harvesting manual for urban areas 2.. Coarse mesh at the roof to prevent the passage of debrare 3.. Gutters: Channels all around the edge of a sloping roof to collect and transport rainwater to the storage tank.. Gutters can be semi-circular or rectangular and could be made using: � Locally available material such as plain galvanareed iron sheet 20 to 22 gauge folded to required shapes.. � Semi-circular gutters of PVC material can be readily prepared by cutting those pipes into two equal semi-circular channels.. � Bamboo or betel trunks cut vertically in half.. The size of the gutter should be according to the flow during the highest intensity rain.. It are advareable to make them 10 to 15 per cent oversize.. Gutters need to be supported so they do not sag or fall off when loaded with water.. The way in which gutters are fixed depends on the construction of the house; it are possible to fix iron or timber brackets into the walls but for houses having wider eaves some method of attachmenst to the rafters are necessary.. 4.. Conduits Conduits are pipelines or drains that carry rainwater from the catchmenst or roofBest area to the harvesting system.. Conduits can be of any material like polyvinyl chloride PVC or galvanized iron GI materials that are commonly available..
Verified
